V Ring Seal Specification and uses: - Used as a pressure less sealing preventing dirt, water, oil splash,. read more Global Polymer Industries. Howrah, 

Filter V-Ring is a solid rubber seal used on shafts to prevent dirt, moisture, and other unwanted material from entering an oil seal, bearing and shaft while keeping lubricants in. It works by stretching over the shaft to create a tight seal along the shaft while the flexible lip seals lightly against the counterface at a right angle to the shaft.

V-Seal Standard Size, V-Seal Standard Size, The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or simiar surface. The long flexible lip is designed to act like a mechanical face seal.

the V-ring may be fitted by using a blunt instrument, such as a screw driver, to manipulate the seal into the correct position. General rules: 1.The V-ring, the counterface and the shaft should be clean. 2.The shaft should preferably be dry and free from grease or oil, particularly when the V-ring is mounted without axial support. 3.The lip of

V-ring seal - type S is broad and tapered, providing a solid grip on the shaft. The V-ring seals - type S are available in sizes ranging from 5 to 199 mm. V-ring type S with bevel back serves as a pressureless, axial rod seal that is clamped on a shaft. Standard: 69575: V-ring Type S Ø4 FKM: 4: FKM: Standard: 69576: V-ring Type S Ø5 NBR

American Seal & Packings V-Packings are multiple lip (chevron) packing sets designed to seal static, reciprocating and centrifugal applications. The male and adaptors are used to complete a set of vee’s and to assist in sealing when compressed.

V-ring seals are mounted on shafts and their thin, tapered lip seals against a surface (counterface) at right angles to the shaft.

These v-ring seals are available for shaft sizes from 11.811" to 79.134" (300 mm to mm).VR4 styles can be stretched up to 2 1/2 times its original diameter as well. VR5 v-ring seal designs are also available. These seals are heavy-duty, large diameter styles that can be easily fitted with a standard clamping band.

V-Ring seals are easy to install. They require almost no disassembly, as their degree of elasticity allows users to stretch them over unit components. These 

Section sizes according to this standard include: 1.6mm, 2.4mm, 3.0mm, 4.1mm, 5.7mm, 8.4mm, O-Ring Reference Number, According to BS4518 the O-Ring reference number =, O-Ring Inside dia (mm - 4 digits -1 decimal place)"-" O Ring Section (mm - 2 digits - 1 decimal place) with the decimal point excluded.

Discard old seals and thoroughly clean the body and sleeve. 2. Install the new O-rings on the sleeve with the dust seal to the rear and the product (pressure) seal up front. 3. Lubricate the body and the sleeve with grease. 4. Insert the sleeve into the body, slowly rotating the sleeve while inserting it into the body.

The V-ring is an all-rubber seal available from All Seals. It is mounted directly on the shaft by hand and seals against a counterface. This unique design has been extensively used on a broad range of applications. Designed with a long, flexible lip, the V-ring can act as a face seal, a lip seal or slinger.

A unique all rubber seal for rotary shafts, V-Ring® offers the perfect solution to prevent ingress of media including dirt, dust and water while retaining 

V-Rings - DICHTOMATIK Seals - A&S Seals Co., Ltd. V-Rings are axial seals with an elastomer sealing element vulcanized in the mold. DICHTOMATIK offers the following application-specific types: oVA = Standard oVS = Reinforced stiffening element oVL = Thin profile VE = For large diameters

V-Rings, Environmental Excluder – These seals are very commonly used to protect bearings on rollers in steel mills, paper mills, cement mills, machine tools, 

An "ERIKS V-ring" is an all rubber one-piece seal which is mounted on a shaft and seals The ERIKS V-ring is manufactured in four standard profiles.

V-ring type A V-ring type A with bevel back serves as a pressure less, axial rod seal with a very short mounting length, which is clamped on a shaft. The flexible sealing lip seals a counterface at a right angle to the shaft preventing dirt, dust and splash to enter the construction. Materiaal Seal : NBR FPM Colour : zwart brown

Basic information ; -40 to 100 °C · V-ring seal · suitable · very suitable · very suitable.

The V-Seal is an all-rubber seal that mounts directly on the shaft and seals axially against counterface, housing, seal case or simiar surface. The long flexible lip is designed to act like a mechanical face seal. It can retain lubricants and exclude contaminants. V-Seal can be used as a primary seal or as a secondary back-up seal.

Designation Dimensions Dimensions Dimensions Di Shaft diameter range Shaft diameter range Seal inside diameter, free state No d1over d1incl d b 3 VA R 0.1063 0.1378 0.0984 0.1

A V-ring consists of a seal body († fig. 2a), a flexible, conical-shaped sealing lip († fig. 2b) and an integral, resilient "hinge" († fig. 2c). It is stretched and installed directly on the shaft, where it is held in place by the inherent tension of the seal body. It rotates with the shaft and seals axially against a stationary counterface.